background image

IMPORTANT INSTRUCTIONS-
DO NOT DESTROY

As with all electrical products, misuse of product or failure to
properly follow the instructions may cause overheating, fire, or
personal injury. Please read the product label and all of the
instructions before using your warming product.
1 Do not use this warming product with an infant, a child, an

incapacitated person, a paraplegic, a quadriplegic, a diabetic,
one insensitive to heat such as a person with poor blood
circulation, or anyone who cannot clearly understand the
instructions and/or operate the controls.

2 Do not use with damaged cords. Damaged cords can lead to

fire. Do not trap, fold, cross, or pinch cords between bed slats,
mattress, or springs, or against walls, footboards, or bed frame.

3 Do not dry clean this warming product. Cleaning liquid may

damage the insulation of the heating element. Improper
laundering may cause problems with the heating wire which can
lead to fire.

4 Do not pinch, flex, or expose the heating wire to rubbing. A

damaged heating wire may result in possible overheating or fire.

5 Turn off the control for the warming product when not using.
6 Keep control away from an open window.
7 Do not use pins; they may damage the electric wiring.

8  Be sure this blanket/mattress pad/throw is used only on an AC

supply current circuit of 110-120 volts. Do not use with an
extension cord.

9 Excissive heating may result from folding blanket, when in

actual use.

10  Keep all dogs, cats, and other pets away from this warming

product. This is an electrical appliance that they can damage
or be injured by.

11 Do not use blanket/mattress pad on a waterbed, sofa, bunk

bed, or mechanically adjustable bed and do not use throw on a
waterbed, bunkbed, or mechanically adjustable bed.

12 Do not use another electronic heating device in conjunction

with your warming product.

13 Use the proper size blanket/mattress pad for your bed. For

example, use a Twin Size warming blanket on a Twin Size bed.

14 If the following Important Instructions are not followed the

warming product will not operate properly.

15 If you see the warming product operating improperly, unplug it

immediately and call Sunbeam Consumer Service at the 800
number listed under “How to Obtain Warranty Service”.

Warnings and Safeguards

Summary of Contents for Arctic Dawn


























Reviews: