background image

16

Taking care of your warming product is easy and safe as long as you follow a few
simple steps.

Caution:

Always disconnect the power cord and the blanket/mattress pad/throw

connection cord at the connection end before washing. Carefully follow all washing
instructions or your warming product may shrink and possibly cause a fire hazard.

DO NOT

• 

DO NOT

dry clean your blanket/mattress pad/throw. 

Dry cleaning solvents may damage the warming element.

• 

DO NOT

use bleach or cleaning fluids.

• 

DO NOT

use a wringer.

• 

DO NOT 

iron the blanket/mattress pad/throw.

• 

DO NOT 

use mothballs or sprays of any kind.

• 

DO NOT

turn the blanket/mattress pad/throw on until it is 

completely dry.

Machine Washing

1

Presoak the blanket/mattress pad/throw for 15 minutes in mild soap 
and lukewarm water.

2

Wash in mild soap and lukewarm water on the delicate or gentle cycle in the
washer for two minutes. Remember, do not use bleach.

3

Rinse in fresh, lukewarm water.

4

Spin dry in the washing machine. Then gently stretch to its original size. 

Machine Drying

Caution:

Do not use commercial dryers or the dryers at your local laundromat. They

get too hot and would damage the wiring of the warming product.

1

Preheat the dryer on the low temperature setting for 2 minutes.

2

Place blanket/mattress pad/throw into the dryer and tumble dry for 
10 minutes at a low temperature.

3

Remove the blanket/mattress pad/throw while it is still damp and 
gently stretch it to its original size.

4

Continue to air dry over a clothesline or a shower rod. 
DO NOT use clothespins.

5

Warming product must be completely dry before using.

Hand Washing

1

Presoak the blanket/mattress pad/throw for 15 minutes in mild soap and
lukewarm water.

2

Gently squeeze the soap suds through a few times.

3

Rinse in fresh, lukewarm water.

Hand Drying

1

Gently stretch the blanket/mattress pad/throw back to its original size.

2

Air dry over a clothesline or hang over a shower rod. DO NOT use clothespins.

3

Warming product must be completely dry before using.

Care and cleaning

OF YOUR WARMING PRODUCT

Summary of Contents for Arctic Dawn


























Reviews: