IMPORTANT SAFEGUARDS
When using your iron, basic safety precautions should always be
followed, including the following:
Read all instructions.
2. Use iron only for its intended use.
3. To protect against a risk of electric shock, do not immerse the iron in
water or other liquids.
4. The iron should always be turned to OFF before plugging or unplugging
from outlet. Never yank cord to disconnect from outlet; instead grasp plug
to disconnect.
5. Do not allow cord to touch hot surfaces. Let iron cool completely
before putting away. Loop cord loosely around iron when storing.
6. Always disconnect iron from electrical outlet when filling with water or
emptying and when not in use.
7. Do not operate iron with a damaged cord or if the iron has been dropped
or damaged. To avoid the risk of electric shock, do not disassemble the
iron. Take it to qualified serviceman for examination and repair. Incorrect
reassembly can cause risk of electric shock when the iron is used.
8. Close supervision is necessary for any appliance being used by or
near children. Do not leave iron unattended while connected.
9. Burns can occur from touching hot metal parts, hot water or steam. Use
caution when you turn a steam iron upside down there may be hot
water in the reservoir.
10. If the malfunction indicator goes on, the flatiron is not operating normally.
Disconnect from the power supply and have the flatiron serviced by
qualified service personnel.
SPECIAL INSTRUCTIONS
This is a 1200 watt appliance. To avoid a circuit overload, to not operate
another high wattage appliance on the same circuit.
2. If an extension cord is absolutely necessary, a I0-ampere cord should be
used. Cords rated for less amperage may overheat. Care should be taken
to arrange the cord so that it cannot be pulled or tripped over,
3. Your Sunbeam iron is designed to rest on the heel rest. Do not leave
the iron unattended.
Do not set the iron on an unprotected surface, even if it is on its heel rest.
SAVE
INSTRUCTIONS
