Sun Oracle Sun Server X4-2, Service Manual

Page: 131 / 276

Servicing FRUs 117
a. To show server faults, log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
->
show /PS/faultmgmt
The server lists all known faults, for example:
Alternatively, to list all known faults in the server, log into the Oracle Solaris
OS and issue the
fmadm faulty
command, or log into the Oracle ILOM
service processor from the Oracle ILOM Fault Management Shell and issue the
fmadm faulty
command.
b. To clear the fault identified in Step 16.a, type the following command:
->
set /System/MB/P0 clear_fault_action=true
For example:
Alternatively, to clear all known faults in the server, log into the Oracle Solaris
OS and issue the
fmadm repair
command, or log into the Oracle ILOM
service processor from the Oracle ILOM Fault Management Shell and issue the
fmadm repair
command.
Related Information
■
“Remove a Processor” on page 106
Servicing the Disk Backplane (FRU)
This section describes how to remove and install a disk backplane.
In addition to the service procedures included here, you can see animations that
show how to remove and install a disk backplane.
-> show /PS/faultmgmt
Targets:
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
-> set /System/MB/P0 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 9y/n)? y
Set ‘clear_fault_action’ to ‘true’