E20425-01 •
Chapter 4 Commands
159
Read Buffer Command
Notes:
•
The tape drive must be unloaded when reading dump, permanent error
trace, or event log data. The minimum allocation length is 4096 bytes.
•
Multiple Read Buffer commands may be required to read the entire
contents of a particular buffer. Blocks of data are transferred in
sequential order. The last transfer may be truncated. All Read Buffer
commands needed to read a complete buffer must use the same
allocation length. The sequence of read buffer commands required to
read a complete buffer should continue uninterrupted until a sense key
of Blank Check is returned.
•
The dump buffer may contain multiple dumps up to a maximum of
12 MB of data.
•
The maximum amount of permanent error trace data or event log data
is 524KB.
•
If no data remains to be transferred, Check Condition status is
returned. The sense key is set to Blank Check with the valid bit set.
Summary of Contents for Storage Tek T10000
Page 14: ...Tables xiv T10000 Interface Reference Manual January 2011 E20425 01...
Page 18: ...What s New xx T10000 Interface Reference Manual January 2011 E20425 01...
Page 82: ...Private Loop SCSI Target Discovery 64 T10000 Interface Reference Manual January 2011 E20425 01...
Page 286: ...Glossary 268 T10000 Interface Reference Manual January 2011 E20425 01...
