56
SPARC T4-1 Server Installation Guide • August 2013
4. Set the netmask for the SP.
This example uses
255.255.255.0
to set the netmask. Your network
environment subnet might require a different netmask. Use a netmask number
most appropriate to your environment.
5. Use the
show /SP/network
command to verify that the parameters were set
correctly.
6. Commit the changes to the SP network parameters.
->
set /SP/network pendingipnetmask=
255.255.255.0
Set 'pendingipnetmask' to '
255.255.255.0
'
->
show /SP/network
/SP/network
Targets:
interconnect
ipv6
test
Properties:
commitpending = (Cannot show property)
dhcp_server_ip = none
ipaddress =
xxx.xxx.xxx.xxx
ipdiscovery = static
ipgateway =
xxx.xxx.xxx.xxx
ipnetmask = 255.255.252.0
macaddress =
xx
:
xx
:
xx
:
xx
:
xx
:
xx
pendingipaddress =
xxx.xxx.xxx.xxx
pendingipdiscovery = static
pendingipgateway =
xxx.xxx.xxx.xxx
pendingipnetmask = 255.255.255.0
sidebandmacaddress =
xx
:
xx
:
xx
:
xx
:
xx
:
xx
state = enabled
Commands:
cd
set
show
->
->
set /SP/network commitpending=true
Set 'commitpending' to 'true'
