30
SPARC T4-1 Server Installation Guide • August 2013
Caution –
The server weighs approximately 60 lb (25 kg). Two people are required
to lift and mount the server into a rack enclosure.
1. If the rack is equipped with an antitilt bar, verify that it has been deployed and,
if not, deploy it.
2. Insert the ends of the mounting brackets into the sliding rails.
FIGURE:
Mounting the Chassis on the Slide Rails
3. While pressing the two green slide rail release buttons, push the server into the
rack until the slide rail locks on the front of the mounting brackets engage the
slide rail assemblies. You will hear a click at that point.
Caution –
Before continuing, verify that the server is securely mounted in the rack,
and that the slide rails are locked to the mounting brackets.
