10
Displaying Average and Current
AVG or CUR During a Test
The average (AVG) or current (CUR) radon values can be displayed during a test.
Turn ON the display (see
on page 9), and note the button press
options in the table below.
AVG or CUR After Test
The average (AVG) and current (CUR) radon values can also be displayed after a
test is completed. Turn ON the display (see
on page 7), and
note the button press options in the table below.
Note:
A completed test cannot be interrupted. After a test is
completed, pressing ON displays the normal start sequence.
Note:
AVG is the average radon concentration over the total
monitoring period; CUR is the average radon concentration over the
last 12-hour period.
Press…
Display Shows…
Comment
–
End Test Y=5 N=2
When the display shows this message, press
AVG (3) or CUR (4) to access those functions.
or
Hold 3&4 Prt/Clr
This message only appears for a moment after
pressing 3 or 4. If the test was just started, the
message “Not Enough Data” is displayed.
–
Average 1.2
If AVG (3) was pressed, radon monitor displays
the average radon concentration over the total
monitoring period.
–
Current 1.2
If CUR (4) was pressed, radon monitor displays
the radon concentration in the current 12-hour
period.
–
Shutting down...
After displaying AVG or CUR, monitor shuts
down to resume test.
Press…
Display Shows…
Comment
Start Test = 5
Press AVG (3) or CUR (4).
Hold 3&4 Prt/Clr
This message only appears for a moment after
pressing AVG (3).
–
Average 1.2
Displays the average radon concentration over
the total monitoring period.
Hold 3&4 Prt/Clr
This message only appears for a moment after
pressing CUR (4).
