Sun Microsystems SunSwift SPARCserver 1000, Service Manual

Page: 44 / 218

2-4 SPARCserver 1000 System Service Manual—June 1996
2
Figure 2-1 Reset Switch and Status Indicators
Table 2-2 lists the function of the front panel LEDs and Table 2-3 lists the other
indicators on the SPARCserver 1000.
Table 2-2 Front Panel LED System Status
LED Position Condition
Left (green) On — DC power supply is receiving AC current
Middle (yellow) On — (first 60 seconds of AC power) POST is running
Off — (when POST completes) no hardware failure detected
On — (when POST completes) hardware failure is detected
Right (green) Off — (first 60 seconds of AC power) POST is running
On — (after POST completes) system is running
Off — (after POST completes) system cannot run; repair needed
Reset switch
LEDs