Sun Microsystems Sun Fire T200, Installation Manual

Page: 69 / 80

Chapter 3 Powering On the System 49
At the Solaris OS prompt, issue the
uadmin
command to halt the Solaris OS and to
return to the
ok
prompt.
2. Switch from the system console prompt to the SC console prompt by issuing the #.
escape sequence.
3. Using the SC console, issue the
poweroff
command.
4. Issue the
poweron
command.
5. Reconnect to the system console using the console command.
The systems displays various messages, followed by the
ok
prompt.
# uadmin 2 0
WARNING: proc_exit: init exited
syncing file systems... done
Program terminated
ok
ok #.
sc>
sc> poweroff -fy
SC Alert: SC Request to Power Off Host Immediately.
sc> poweron
sc> SC Alert: Host System has Reset
sc> console -f
Enter #. to return to ALOM.