Sun Microsystems Sun Fire T200, Installation Manual

Page: 64 / 80

44 Sun Fire T2000 Server Installation Guide • April 2006
1. Open a telnet session and connect to the system controller by specifying its
network address.
2. Login as
admin
using the password you previously set.
Using the System Controller for
Common Operations
▼
To Power On the System
Powering on the system requires you to use the
poweron
command at the SC
console.
●
To initiate the power-on sequence, issue the
poweron
command.
You will see an
sc>
alert message on the system console. This indicates that the
system has reset.
% telnet
129.148.40.30
Trying
129.148.40.30
...
Connected to
129.148.40.30
.
Escape character is '^]'.
Copyright 2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Sun(tm) Advanced Lights Out Manager 1.0.11 ()
Please login:
Please login: admin
Please Enter password:
password
sc>
sc> poweron
SC Alert: Host System has Reset
sc>