Sun Microsystems StorEdge X6767A, Installation Manual, Page: 60 / 68

-16 Sun StorEdge 2G FC PCI Single Channel Network Adapter Installation Guide • May 2002
7. Enter the
print
command to display the updated partition table.
The following example shows that the
root
tag, the
wm
permissions flag, and the
partition size of
2.00GB
are assigned to slice 0.
8. Repeat Step 2 through Step 7 as needed until all slices are defined as they are in
the temporary boot disk.
9. Enter the
quit
command to return to the
FORMAT MENU
.
partition> print
Current partition table (unnamed):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 1451 2.00GB (1452/0/0) 4194828
1 swap wu 91 - 181 128.37MB (91/0/0) 262899
2 backup wu 0 - 24619 33.92GB (24620/0/0)
71127180
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
partition> quit
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format>