Sun Microsystems StorEdge X6767A, Installation Manual, Page: 30 / 68

-6 Sun StorEdge 2G FC PCI Single Channel Network Adapter Installation Guide • May 2002
Caution – If you need to remove a system board for installation, place the board on
a padded antistatic mat to prevent damage.
1.4 Installing the Network Adapter
1. Pull the dust cover out of the 2 x 5 optical transceiver (OT) connector (FIGURE 1-
3).
FIGURE 1-3
Sun StorEdge PCI Single 2G Fibre Channel Network Adapter Dust Covers
2. Install the Network Adapter in the PCI slot you have chosen.
Installation details vary for each system. Refer to your system documentation for
specific instructions.
3. Reassemble the system.
Refer to your system documentation for specific instructions.
4. Disconnect the wrist strap.
5. Push the fiber optic cable connector into the OT connector until you hear a click
(FIGURE 1-4).