4
Sun StorEdge N8200 Filer Installation, Configuration, and Service Guide • August 2000
Installing the N8200 Filer
This section includes instructions for rackmounting the filer hardware. The filer
hardware includes the disk storage unit, the controller, and the rackmounting
hardware for the disk storage unit. This section contains the following topics:
■
“To Rackmount the Equipment” on page 4
■
“To Connect the Cables and Power On the System” on page 5
■
“To Set Up the Initial System Configuration” on page 9
■
“To Verify the Installation” on page 14
▼
To Rackmount the Equipment
1. Unpack the disk storage unit.
Refer to Sun StorEdge A1000 and D1000 Installation, Operation, and Service Manual.
2. Unpack the mounting rails for the disk storage unit.
3. Install the mounting rails in the rack and mount the disk storage unit on the rails.
Refer to Sun StorEdge A1000 and D1000 Rackmount Installation Guide.
4. Unpack the controller (it comes with mounting rails).
Refer to Sun Enterprise 220R Server Setup and Rackmounting Guide.
5. Install the mounting rails in the rack.
Refer to the instructions decal on the top of the controller or to Sun Enterprise 220R
Server Setup and Rackmounting Guide.
6. Mount the controller on the rails.
Refer to the instructions decal on the top of the controller or to Sun Enterprise 220R
Server Setup and Rackmounting Guide.
