14
Sun StorEdge N8200 Filer Installation, Configuration, and Service Guide • August 2000
Note –
To enable a Microsoft Windows NT host to access the filer storage system,
you must install and configure an NFS client on the NT hosts. The filer currently
supports any connection via versions 2 and 3 of the NFS system. Several NFS clients
are available for download from various companies. Common Internet File System
(CIFS) is not currently supported.
The filer is installed and ready to run. For instructions on how to use and manage
the filer, refer to Sun StorEdge N8000 Filer Series Administrator’s Guide.
▼
To Verify the Installation
Verifying the installation consists of creating a new share and accessing it from a
remote host. To complete this section, refer to the Sun StorEdge N8000 Filer Series
Administration Guide to perform the following steps:
1. Start the Filer Administration Tool.
Refer to “To Start the Filer Administration Tool.”
2. Create a new share.
Refer to “To Add a New Share.”
3. Try to mount the newly created share from another host.
Note –
If the Filer is configured with both NFS and CIFS protocols, perform step 3
from a host that supports both of these protocols.
