Sun StorEdge N8200 Filer Installation, Configuration, and Service Guide
21
2. Log in as the root user and type:
3. Type
Yes
when the following prompt is displayed:
4. When you see the
ok
prompt, power off the system.
5. Correct any cabling errors.
6. Ensure the disk storage unit(s) are powered on and no amber lights are lit, and
then reboot and follow the instructions from Step 3 on page 12.
7. If the problem persists, have the error messages available and contact your local
Sun service provider.
Cannot Ping the Filer on the Network
1. Check to make sure you can ping other hosts on the network.
2. Verify the filer network cable is properly connected.
3. Check the network with the console connection.
a. Connect the serial cable to the filer.
b. Log in as a root user.
If no login prompt is displayed, go to “No Indication of a Console Connection Is
Provided” on page 20.
c. Try to ping another host on the network.
If you can ping another host, a problem exists with the network. Contact the
system administrator.
# sys-unconfig
#
Verify to execute card
