Sun Microsystems StorEdge L400, Installation And User Manual, Page: 118 / 162

7-32 Sun StorEdge L400 Installation and User’s Guide • April 1998
The following chart explains the element index information.
7.5.5.3 Element Position Information
The
Position Info
command displays information about each element position.
To display element position information:
1. Select the
Library Info Menu
by pressing
↓
or
↑
, then Enter.
2. Select the
Inventory Menu
by pressing
↓
or
↑
, then Enter.
INX Displays the element index.
Addr (Address) Shows the SCSI address of this element.
Src (Source
Element Index) Shows the index of the last storage element from which the cartridge
was moved.
O (Occupied)
0
1
Indicates whether the tape library considers the specified element
location to contain a tape cartridge, as follows:
Element location does not contain a tape cartridge.
Element location contains a tape cartridge.
V (Occupied
Valid)
0
1
Indicates whether the Occupied flag is accurate.
Occupied flag is questionable (may not be accurate).
Occupied flag is accurate.
P (Cartridge
Holder or Tape
Drive Present)
0
1
Indicates if a cartridge holder or tape drive is installed. If the element
index references a storage element, this flag indicates whether the
holder is installed. If the element index references a tape drive, this flag
indicates whether that particular drive is installed.
The values for this flag are:
Not installed
Installed
A (Tape Drive
Accessible)
0
1
Indicates whether a drive is empty, a cartridge is loaded in the drive, or
the cartridge is ejected:
Cartridge may be loaded in the drive.
Drive is empty or the cartridge is ejected and ready to be picked.