Sun Microsystems StorEdge 3000 Series Installation, Operation And Service Manual Download Page 37

Page: 37 / 318

Chapter 1

Product and Architecture Overview

1-11

1.6

Additional Software Tools

The following additional software tools are available on the Sun StorEdge 3000
Family Professional Storage Manager CD, provided with your array:

■

Sun StorEdge Configuration Service, a management and monitoring program

■

Sun StorEdge Diagnostic Reporter software, a monitoring utility

■

Sun StorEdge CLI, a command-line utility to monitor and manage the array.

Refer to the

Sun StorEdge 3000 3000 Family Software Installation Guide

for information

about installing these tools.

The Sun StorEdge 3000 Family Documentation CD provides the related user guides
with configuration procedures for these tools.

For other supported software tools, refer to the release notes, located at:

http://www.sun.com/products-n-solutions/hardware/docs/

Network_Storage_Solutions/Workgroup/3510

Summary of Contents for StorEdge 3000 Series































































































































































































































































































































Search results

Summary of Contents for StorEdge 3000 Series

Reviews:

Brands by name

Popular brands

Sun Microsystems StorEdge 3000 Series, Installation, Operation And Service Manual

Search results

Summary of Contents for StorEdge 3000 Series

Reviews:

Brands by name

Popular brands