Sun Microsystems StorageTek TIMBERWOLF 9740, Hardware Operator'S Manual

Page: 76 / 100

Repairing a Detached Leader Block
A-6 Revision P 95693
When a cleaning cartridge is used the specified number of times, it is automatically placed
into the CAP, and the operator panel displays “(3480, SD-3, DLT, T9840, or T9940)
CLEANING CART USED UP.” See
“Replacing Cleaning Cartridges” or “Replacing
Cleaning Cartridges” in Chapter 3, “Operating the LSM,” for this procedure.
■
Repairing a Detached Leader Block
When a tape is damaged, use a backup tape. If a leader block is detached and
there is no obvious damage to the cartridge or tape, and you have no backup
tape, you may repair the leader block using a repair kit provided by your
supplier. You can use the tape one time to copy the data onto another tape.
■
Ordering Media
Contact your authorized selling agent for Sun-approved labeled cartridges. You must
select the volume serial number (VOLSER) range and other label options when ordering
cartridges. If you choose to order additional labels, order them from any standard media
vendor.
Labels used in StorageTek libraries can be made by any vendor that produces a label that
meets the Sun Label Specification. Some vendors (not all inclusive) are:
• EDP/Colorflex http://www.colorflex.com
• NetC http://www.netcllc.com
• WrightLine/American Eagle Systems http://www.americaneaglesys.com
• Dataware http://www.datawarelabels.com
These Web sites contain links to third party sites. These links are provided as a
convenience to you and not as an endorsement by Sun. Sun is not responsible for the
content of these linked Web sites and does not make any representations regarding the
content or accuracy of any content on such Web sites.
For technical questions, contact the Sales Support at:
Telephone: 1.800.ask4stk (1.800.275.4785)
E-mail: sales_support@storagetek.com.