Sun Microsystems StorageTek 5320, Getting Started Manual

Page: 80 / 226

60 Sun StorageTek 5320 NAS Appliance and Gateway System Getting Started Guide • May 2006
The cabling differs depending on the number of expansion enclosures you are
connecting:
■
For one expansion enclosure, refer to “To Cable a Controller Enclosure to One
Expansion Enclosure” on page 60 .
■
For two expansion enclosures, refer to “To Cable a Controller Enclosure to Two
Expansion Enclosures” on page 61 .
■
For three expansion enclosures, refer to “To Cable a Controller Enclosure to Three
Expansion Enclosures” on page 62 .
■
For four to seven expansion enclosures, refer to "To Cable a Controller Enclosure
to Seven Expansion Enclosures" on page 64 .
▼
To Cable a Controller Enclosure to One Expansion
Enclosure
To connect a controller enclosure and one expansion enclosure, two 2-meter Active
Copper cables are required. Refer to
FIGURE 3-6
.
FIGURE 3-6
Controller Enclosure and One Expansion Enclosure Cable Interconnection
1. Connect one Active Copper cable between the A side expansion port of the
controller enclosure and the A side port 1 of the expansion enclosure.
2. Connect one Active Copper cable between the B side expansion port of the
controller enclosure and the B side port 2 of the expansion enclosure.
Note – The A side port 2 and B side port 1 of the expansion enclosure remain
empty.
A
B
Expansion enclosure
Controller enclosure