Chapter 3
Replacing Components
3-27
▼
Install PCI-X and PCIe Cards in Slot 0-3
1. Prepare the server for PCI card installation.
See
Chapter 2
.
2. Remove the replacement card from its packaging and place it onto an antistatic
mat.
3. Remove the PCI air baffle (
FIGURE 3-21
).
FIGURE 3-21
PCI Slot Securing Bracket
4. Swing the PCI securing bracket up.
5. If a filler panel is installed, remove it by pulling the tab.
6. Lower the card into the PCI slot.
7. Rotate the PCI securing bracket down.
8. Replace the PCI air baffle.
9. See
Chapter 4
to perform the tasks needed to bring the server back online.
