2
Netra t1 4-Stack Memory Upgrade: Addendum • June 2000
Materials and Tools Required
Note –
The boards you must use for the 4-stack memory installation have the part
number 370-4155. Other 256 Mbyte memory boards (those with part numbers 370-
4096 and 595-5097) cannot be included in a 4-stack configuration. The boards you
must use are identifiable by a sticky label saying ‘4-stack only’.
The packaging containing your 4-stackable 256 Mbyte memory board includes a kit
(part number 540-4532-02) containing the following (see
FIGURE 1
):
■
Four square spacers
■
Four lock washers
■
Four flat washers
■
Four long screws (11/16 inch; required only for 4-stack configurations)
■
Four round plastic spacers (required only for 2-stack configurations)
■
Four short screws (3/16 inch; required only for single-board configurations)
■
Four medium length screws (3/8 inch; required only for 2-stack configurations)
To install a stack of four boards, you need four memory board packages. To order a
single package from your Sun Enterprise Services representative, quote the sales part
number X6985A.
FIGURE 1
The 4-Stackable Memory Board Kit
!
4 square spacers
Label:
4 stack
ONLY
4 long screws
(11/16 inch)
Memory board
4 lock washers
4 flat washers
4 round spacers
4 short screws
(3/16 inch)
4 medium length
screws (3/8 inch)
