1
Installing Four 256 Mbyte Memory
Boards
This document tells you how to install a stack of four 256 Mbyte memory boards
into the Netra t1 system. If you want to install a single additional 256 Mbyte
memory board, follow the instructions in the Netra t1 Systems Memory Upgrade
document (part number 806-2129-11).
Note –
Do not install memory boards in stacks of three. If you do not want to install
boards in a 4-stack configuration, you can install them in single-board or 2-stack
configurations. In a 2-stack configuration, you can combine Netra t1 memory boards
of different capacities (64, 256, or 512 Mbytes).
This document contains the following sections:
■
“Materials and Tools Required” on page 2
■
“Wearing an Anti-Static Wrist Strap” on page 3
■
“Installing the Stack of Four Boards” on page 4
!
