Sun Microsystems 15K/9960, Site Planning Manual

Page: 55 / 70

Appendix B Safety Agency Compliance Statements 35
Placement of a Sun Product
SELV Compliance
Safety status of I/O connections comply to SELV requirements.
Power Cord Connection
The following caution applies only to devices with a Standby power switch:
Caution – Do not block or cover the openings of your Sun product. Never place a
Sun product near a radiator or heat register. Failure to follow these guidelines can
cause overheating and affect the reliability of your Sun product.
Caution – Noise level during normal operating condition is below 70Db(A). Noise
level during over temperature condition may be above 70Db(A). Limit exposure
during this temporary condition.
Caution – Sun products are designed to work with a line-to-neutral or line-to-line
connection. To reduce the risk of electric shock, do not plug Sun products into any
other type of power system. Contact your facilities manager or a qualified
electrician if you are not sure what type of power is supplied to your building.
Caution – Not all power cords have the same current ratings. Household extension
cords do not have overload protection and are not meant for use with computer
systems. Do not use household extension cords with your Sun product.
Caution – Your Sun product is shipped with a grounding type (three-wire) power
cord. To reduce the risk of electric shock, always plug the cord into a grounded
power outlet.