Sun Microsystems 15K/9960, Site Planning Manual

Page: 49 / 70

Chapter 6 Site Planning Checklists 29
Network Planning
❏
Have the Ethernet connections in Chapter 5 been considered for the customer
network?
❏
Have all networking cables been ordered to arrive prior to installation?
❏
Have all network connections for each configured network controller been
ordered?
❏
Have all IP addresses for each configured network controller been assigned?
❏
Are the Ethernet connections available to the public network?
Planning Your Access Route
❏
Has a 60-inch pallet jack been obtained for transporting the system cabinet on
the pallet? (Refer to the Sun Fire 15K System Unpacking Guide, part number
806-3508.)
❏
Has an access route to the final system location been identified?
❏
Does the access route satisfy the access requirements outlined in “Planning Your
Access Route” on page 6?
❏
Have provisions been made to cover irregular or engraved floor patterns along
the access route to reduce vibration?
❏
Have personnel been allocated to unload the system during delivery? (Refer to
the Sun Fire 15K System Unpacking Guide, part number 806-3508.)
❏
Does the loading dock meet the standard freight-carrier truck requirements?
Trucks can be between 48 ft (14.6 meters) and 61 ft (18.6 meters) long,
8.5 ft (2.6 meters) wide, and 14 ft (4.3 meters) high.
❏
If the loading dock does not meet the standard freight-carrier truck
requirements, has a forklift been allocated for delivery? (Refer to the Sun Fire
15K System Unpacking Guide, part number 806-3508.)
❏
Has a truck with a lift gate that can accommodate the crated system been
requested through the Sales Desk Service Liaison (cs-10k@oregon.west)? See
“Planning Your Access Route” on page 6 of this Site Planning Guide for physical
specifications.
❏
Does the access route meet the floor-loading requirements for the system?