CLIMBING UP WITH YOUR NEW STAND
ALWAYS refer to the written FBFAHS instructions
and videos for proper and safe use of your FBFAHS
before climbing.
1.
Following the FBFAHS Instructions, attach the
harness tether to the tether strap. Loop the strap
around the tree to secure it. See
figure 13
.
2.
Your RapidClimb stirrups and bungee heel cord
should be already attached to your treestand. To use,
back your heel into the bungee heel cord (
figure 14
)
then simply slide your boot under the RapidClimb
stirrup. Make sure that your boot is secure under the
stirrup as shown in
figure 15
.
3.
On all models hook the black elastic bungee cord
around the seat as shown in
figure 16
to keep it
secure while you climb.
4.
To begin climbing, raise your seat platform up to
just below waist height and grasp the upright arms
very firmly as shown in
figure 17
.
WARNING
!
At this point IT IS MANDATORY AND REQUIRED
that you attach your FBFAHS to the tree and
remain connected at all times after leaving the
ground.
13
14
15
16
CLIMBING UP / USE / CLIMBING DOWN
PG 8
www.summitstands.com
5
17
UPRIGHT
ARMS
ALUMINUM
VIPER SHOWN
STEEL SIMILAR
ALUMINUM
VIPER SHOWN
STEEL SIMILAR
