PG 12
www.summitstands.com
Your treestand is designed to “nest” together as one
unit making it easy to transport.
1.
Start with the seat platform portion of the stand,
set it on its end as shown in
figure 28
.
2.
Take the platform and slide it into the seat
platform. Overlap the platform frame with the seat
platform frame as shown in
figure 29
. The foot
platform teeth will rest up against the V-brace area
on the seat platform as shown in
figure 30a
. You can
also overlap the platform frame as shown in
figure
30b
for a more compact package.
3.
From this position, pull the seat backrest through
the large gap in the platform as shown in
figure 31
.
4.
Secure the seat to the stand by running the seat
bungee around the frame and clipping it off
(
figure 32
)
5.
The straps will typically be wedged in behind the
seat. Pull them out and around the seat webbing and
push the seat as far down in the frame as possible
(
see figure 33
).
6.
Secure the top and platform together with the 1”
wide green strap with the spring loaded tourniquet
buckle as shown in
figure 34
. This will prevent seat
the seat and the platform from making noise as you
hike to your hunting location.
7.
Use the backpack straps to carry the unit on your
back. Pull the loose end of the straps to tighten and
pull up on the buckle to release.
28
29
30a
31
32
33
34
30b
NESTING STANDS FOR BACKPACKING
6
