PG 10
www.summitstands.com
31
U BRACKET
STABILIZER
FEMALE SECTION
(PN 82065.950)
32
1 3/4” BOLT, LOCK NUT -
WRENCH TIGHTEN
STABILIZER
FEMALE SECTION
STABILIZER
MALE SECTION
(PN 82065.940)
33
1/4” WIRE LOCK PIN
34
STABILIZER BAR
1.
Position the Female Section of the Stabilizer bar as
shown in
figure 31.
The Stabilizer bar will attach to the
welded U Bracket. Slide the bar into the bracket and
line up the hole.
2.
Secure using one
1 3/4” bolt and lock nut
.
(see figure 32)
Do not overtighten.
3.
Position the Male Stabilizer bar as shown
(figure 33).
Line up the bolt holes and secure using the
Wire Lock
pin
as shown in
figure 34.
The Stabilizer bar has several
holes to accommodate different tree sizes.
1 3/4” BOLTS, LOCK NUTS -
WRENCH TIGHTEN
30
