![background image](http://html.mh-extra.com/html/summeraire/shrv-100t/shrv-100t_user-manual_1391125004.webp)
4
2. SUGGESTED OPERaTING INSTRUCTIONS
anytime the HRV is powered on allow 20 seconds for the main
control to reset prior to making any operational selections.
Heating Season
Turn HRV ON, fan speed will cycle to previously select mode of operation.
Continuous low speed ventilation is recommended to ensure that fresh air is
available to building occupants.
If your home feels too humid or if you have water condensation on the windows,
rotate the built-in dehumidistat Dial (left side of HRV). Set dehumidistat control
between 30-40% humidity.
If your home feels to dry: rotate dehumidistat Dial (left side of HRV) slowly in
a COUNTER-CLOCKWISE direction in 5 point increments and allow HRV to
run in this position for 24 hours. If symptom continues, repeat this step. Also, if
there is a humidifier installed, check to make sure it is working properly.
If a higher rate of continuous ventilation is desired: Press the SELECT button
(located at left hand side of HRV) once to change to the next run speed.
If HRV continuous ventilation is not desired (not recommended), press the
SELECT button until LED at AUTO/OFF is illuminated. HRV will not run
unless a wall control is activated. Remote Touch Pad will activate 20/40/60
minutes of high-speed ventilation and then the HRV will return to AUTO/OFF.
Dehumidistat activation results in high-speed ventilation until humidity level of
indoor air is less than the dehumidistat setting, then the HRV will then return to
AUTO/OFF.
Note: If your house is too dry, it’s best to install a humidifier rather than to turn
the HRV off.
Summary of Contents for SHRV 100T
Page 23: ...23 Notes ...