10
Remote Timer Touch Pad - Model PBT
Timer Touch Pads are typically installed in any room
where 20/40 or 60 minutes of high-speed ventilation
may be desired, i.e. bathrooms and/or kitchens. Once
activated by a momentary push, these buttons illuminate
to indicate high speed activation. If more than one touch
pad is installed in the system then all will illuminate upon
activation until the timed sequence has expired. To cancel
a selection simply continue to push the select button
until it turns off. The display LEDS on the touch pad will
illuminate to represent the time remaining.
Wall Mount Dehumidistat - Model SRDEH
This control is typically installed in an area of the home
where humidity may require automatic monitoring. This
could be a central location (i.e. near furnace thermostat)
or in a specific room (i.e. kitchen, laundry etc.).
Scout Control
This control is detachable from the HRV to provide a
remote control operation of the HRV. Once removed from
the HRV one can only turn the power off at the HRV. By
positioning the Scout remotely to the HRV, you can adjust
fans speeds, select auto/off, intermittent or turn the main
HRV control Off. When the HRV has been turned off
using the Scout, power still remains on at the HRV on/off
switch however all external controls will not function.
Intermittent- In this mode the ventilation fan will run for
20 minutes and turns off for 40 minutes. This cycle will
continue until cancelled. External devices are active.
Summary of Contents for SHRV 100T
Page 23: ...23 Notes ...
