9
Finally
We stress that it is your obligation to see that:
1. Owner receives -
A) “Owner’s Operating Instructions”
B) This set of Installation Instructions
2. That installation is made in accordance with C.S.A.
Installation Standard B 365 or the National Building
Code OR Local Codes and regulations.
NOTE: If changes are made to the installation of a
gas furnace, including clearances for servicing, these
changes shall comply with CGA Standard
CAN1-B149.1 or CAN1-B149.2
3. Oil furnace is to be installed to C.S.A. Standard B 139
4. Owner is fully instructed in operating furnace, and in
all procedures necessary to ensure its complete and safe
operation.
5. The enclosed card must be filled out completely and
attached in a visible manner to the S-150 unit.
