Sullair 02250201-297 R01, User Manual

Page: 25 / 146

SECTION 2
PRODUCT USER MANUAL
25
2.22 SETTINGS
No Temperature Set Points Page What does it show? Set Points (°C / °F)
Ideal value that should
be seen (°C/°F)
1- Inlet Air Temp. - Low Alarm Setpoint The bottom limit of the Dryer air inlet temperature 0 / 32
35 / 95
2- Inlet Air Temp. - High Alarm Setpoint The top limit of the Dryer air inlet temperature 55 / 131
3- Exchanger Temp. - Low Alarm Setpoint The bottom limit of the refrigerant gas temperature in the Evaporator (-)3 / 26,6
2-10 / 36-50
4- Exchanger Temp. - High Alarm Setpoint The top limit of the refrigerant gas temperature in the Evaporator 20 / 68
5- Low Pressure Line Temp. - Low Alarm Setpoint
The bottom limit of the refrigerant gas temperature in the
Low pressure side of the refrigerant circuit
(-)5 / 23
7-20 / 45-68
6- Low Pressure Line Temp. - High Alarm Setpoint
The top limit of the refrigerant gas temperature in the
Low pressure side of the refrigerant circuit
45 / 113
7- High Pressure Line Temp. - Low Alarm Setpoint
The bottom limit of the refrigerant gas temperature in the
High pressure side of the refrigerant circuit
0 / 32
40-80 / 104-176
8- High Pressure Line Temp. - High Alarm Setpoint
The top limit of the refrigerant gas temperature in the High pressure
side of the refrigerant circuit
90 / 194
9- Ambient Temperature - Low Alarm Setpoint
The bottom limit of the Ambient air temperature
(Dryer room temperature)
0 / 32
25 / 77
10- Ambient Temperature - High Alarm Setpoint
The top limit of the Ambient air temperature
(Dryer room temperature)
55 / 131
11- Exchanger Temp. - ECO Start Setpoint
Dryer stops automatically when the evaporation
temperature goes below that temperature
2 / 36
12- Exchanger Temp. - ECO End Setpoint
Dryer starts automatically when the evaporation
temperature goes above that temperature
8 / 46
13- Condenser Temp. - Dif. Setpoint Temperature between refrigerant inlet and outlet of the condenser 5 / 5
No Time Parameters Page Set Points
1- Exchanger Temp. - Alarm Delay (Minute)
When the dryer is turned on Controller does not read evaporator temperature for sometime
until the refrigerant circuit stabilizes
20
2- ECO Start Delay (Minute)
Controller does not stop the dryer during that time after the evaporation temperature goes
below the set temperature
10
3- Low Pressure Line Temp. - High Alarm Delay (Minute)
When the dryer is turned on the controller does not measure Low and High temperatures
for a period of time
10
4- Restart Delay (Second) When the dryer stops it does not re-start for some seconds because of safety 30
5- Drain Off Time (Minute) Timer drain is "off" during that time 3
6- Drain On Time (Second) Timer drain is "on" during that time 5
7- Filter Change Period (Hour) Warning to the customer to replace the elements of their filters 8000
8- General Maintenance Period (Hour) Warning to the customer to get a service from Sullair 20000