Sudvision CB04, Operation Manual

Page: 6 / 14

e. If the product shows a noticeable change in performance.
-To reduce the risk of electric shock, do not disassemble this product. Take it
to qualified service personnel when service or repair work is required. Opening
or removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the appliance is
subsequently used.
-Do not use the unit if the power cord is damaged or if the plug socket contact
is loose. Not following these instructions may result in electric shock, fire or
other hazards.
-When unplugging the power plug, do not pull it by the cord but rather grip the
plug and pull it out, not following those instruction may result in electric shock,
fire or damage to the unit.
5. Power Up
Connect the power cord to the machine (power outlet), then plug it to power
source and switch the unit on. The unit will conduct a self-checking by
spanning the feeding roller while the UV or MG1/UV functions will be
automatically turned on by default. The counting display will show ‘0’ when the
unit is ready, which means the machine is in its normal working condition.
6. Counting Function
1>Counting Function
Once the bills are correctly placed in the hopper, the machine will start
counting automatically. The number of counted bills will be shown on the
counting display. Moreover, once the bill removed from the stacker and start to
another batch counting, the count ing display will start from 1 and the ‘BATCH’
display in turn will be number of last counted bills instead.
OCRL International SRL 4
www.ocrl.com.ar