Sudvision CB04, Operation Manual

Page: 8 / 14

7. Counterfeit Detection
·UV (Ultraviolet) detection function <available for the model with UV detection
or the model both with UV and MG detections>
Used to check all kinds of banknotes which contains UV feature.
The UV function is automatically turned on by default when the machine is
powered up. It can also be selected or deselected by pressing the UV button
located in the function console. If the machine detects a counterfeit note
during counting, it will stop and emit beeping sound, while the counting display
will show the message ‘E - 2’ and the ‘ ’ indicator will blick (alerting the
presence of a dubious bill). The dubious bill will always be the last one in the
stacker. Remove dubious bill and press ‘BATCH’ button to continue counting.
PLEASE NOTE: there are 10 levels of UV sensitivity for selection, press ‘SET’
button for 3-5 seconds, the counting d isplay window shows ‘OP - A’ and the
batch display window shows one digit of the number ‘OFF - 10’.
Press the button ‘BATCH/ADD’ to select ‘UV’ sensitivity as required. If setting
value is higher, the Stronger UV sensitivity, if choosing OFF, the UV detection
is off, After choosing, press RESTART button to confirmed.
·MG (magnetic) detection function (available for the model with both MG and
UV detection).
Used to check all kinds of banknotes which contains MG feature.
The MG1 function is automatically turned on by default when the machine is
powered up. It also can be selected or deselected by pressing the MG button
located in the function console.
PLEASE NOTE: there are two level of MG: MG1 and MG2, MG1 detect the
banknote with low magnetism and MG2 detect the banknote with high
magnetism. They can be selected and deselected by pressing MG button. The
MG1 is automatically activated by default when powered up, pressing MG2 is
activated and MG2 indicator is on. Press MG button one time, then MG2 is
activated and MG2 indicator is on. Press MG buttons one more time to close
OCRL International SRL 6
www.ocrl.com.ar