Sudvision CB04, Operation Manual

Page: 7 / 14

Bills need to be placed correctly as indicated in the following steps:
Place the bill between the counting guides as shown in the figure 1 and figure
2. Swiftly, push the bills with a finger <see figure 3> to make them rest on the
top of the hopper plate and in the correct counting position.
Figure 1 Figure 2 Figure 3
2>Addition Function
The Addition function can be performed by pressing the ‘ BATCH/ADD ’ button
twice. When the ADD indicator is on, in this case, removing the counted bills
from the stacker and start another batch counting, the counting display will not
show number from 1 and will be added to previous counted quantity. Press
‘BATCH/ADD’ button again to close this function.
3>BATCH Function
Press ‘BATCH/ADD’ button to open the Batch functi on which indicator light is
on. The batch number shows 100, press the display ‘ RESTART/- or ’
to set up the batch number needed.
Note: The Addition function can be performed when the batch function is on. In
this case, the machine will stop automatically when its counting quantity is up
to the batch value. When starting another batch counting, the counting display
will show the total cou nting sum that’s added form previous counted quantity.
OCRL International SRL 5
www.ocrl.com.ar