Page 9
2-6
#7040748 - Revision A - September, 2016
Electronic Control System
MODEL UW-24
MODEL UW-24
Adjusting Temperature Set-Points
To adjust set-points, press the COLDER or WARMER keys on the control panel in multiple key strokes until the
desired set-point is achieved (See Figure 2-6). One key stroke equals a one degree change. The set-point is dis-
played for three seconds after the last key stroke. After three seconds, the compartment temperature is displayed.
As the compartment temperature changes, the temperature displayed changes by no more than one degree per
minute.
NOTES
: The temperature range in a wine storage compartment is 40°F to 65°F.
Lighting System ON/OFF
For the purpose of displaying a wine supply, it is possible to energize the lights 100% of the time, even when the
door is closed. To do so, press and release the LIGHTS key (See Figures 2-7). To switch back to normal lighting
operation, press and release the LIGHTS key again.
Temperature Alarm and Door Alarm ON/OFF
There is an audio/visual temperature and door alarm in the UW-24 unit that can be enabled to warn a customer of
temperatures problems or if the door was left open. To enable the alarm, press and release the ALARM key (See
Figure 2-8). If the alarm is enabled, then the alarm icon on the display is illuminated. To disable this feature, press
and release the ALARM key again, and the alarm icon is de-energized.
NOTE:
If the alarm is enabled and temperature problems or door ajar are experienced, the alarm icon flashes and
the alarm will beep. There are also provisions in a UW-24 unit to allow for the alarm feature to be tied into a home’s
security alarm system.
Adjusting lower compartment set-point “colder”
Figure 2-6. Adjusting Set-Point - Press Desired COLDER or WARMER Key In Multiple Key Strokes
Figure 2-7. Lighting System ON or OFF - Press LIGHT Key
Figure 2-8. Switching Temperature/Door Alarm ON or OFF - Press ALARM Key, Bell Appears when Activated