Page 34
5-6
#7040748 - Revision A - September, 2016
Component Removal
MODEL UW-24
MODEL UW-24
Upper or Lower Evaporator Fan Cover Removal
To remove the upper or lower evaporator fan cover
(See Figure 5-9):
1.
Remove the wine racks from the required section.
2.
Extract the evaporator fan cover screws.
Upper and Lower Evaporator Cover Removal
To remove either of the evaporator covers, the wine
racks, cabinet slides, slide spacers, slide support spac-
ers and evaporator fan cover must be removed first,
then (See Figure 5-10 and 5-11):
1.
Extract ground screw from ground bracket.
2.
Pull evaporator cover forward.
3.
Push compartment thermistor through the thermis-
tor grommet.
4.
Remove evaporator cover from the unit.
NOTE:
When reinstalling the evaporator cover, the
ground screw must be reinstalled.
Figure 5-9. Evap Fan Cover Removal
Figure 5-10. Upper Evap Cover
Ground Screw
Evap Fan Cover
Upper
Evaporator
Cover
Ground Screw
Upper Evap Cover
Screw
Ground
Bracket
Figure 5-11. Lower Evap Cover
Lower
Evaporator
Cover
Ground Screw
Ground
Bracket
Thermistor
Grommet
Thermistor Grommet
