– 36 –
9-4-5 PIPE FRAME
(1)
Attach two mount rubbers for the engine base
onto the frame.
Tighten the nuts from the bottom side of the
frame.
8 ø flange nut ............................. 2 pcs.
Tightening torque: 11.8 ~ 13.7 N-m (120 ~
140 kg-cm, 8.68 ~ 10.1 ft-lb)
(2)
Attach the 5 ø terminal of grounding wires
(green/yellow) to the unpainted thread hole of
the frame base plate using a 5 mm brass
screw.
(3)
Attach the generator mount rubber to the frame.
NOTE: The mount rubbers are selected to reduce vibration most effectively by model and its
frequency.
Be sure to use the correct mount rubber for your generator.
5 ø TERMINAL
(FRAME)
8 ø TERMINAL
(REAR COVER)
6 ø TERMINAL
(CONTROL BOX)
PIPE FRAME
GENERATOR BASE
MOUNT RUBBER
MOUNT RUBBER
2 pcs.
RGD3300H: 8 ø NUT
RGD5000H: 10 ø NUT
2 pcs.
2 pcs.
8 ø NUT
8 ø BOLT
2 pcs.
6 ø BOLT
2 pcs.
FUEL TANK
BUFFLE PLATE
ENGINE BASE
STOPPER
RGD3300H: 8 ø NUT
RGD5000H: 10 ø NUT
2 pcs.
2 pcs.
GENERATOR_GS2380.fm 36 ページ ２００７年１０月１日 月曜日 午前９時１３分
Summary of Contents for ROBIN RGD3300H
Page 1: ...SERVICE MANUAL RGD3300H RGD5000H GENERATORS Models PUB GS2380 Rev 06 08 ...
Page 2: ......
Page 53: ......
