Subaru impreza 2017, Owner'S Manual

Page: 322 / 786

9.7.4 Signals
SEMOD55883-1 v2
PID-4139-INPUTSIGNALS v12
Table 186: DPGAPC Input signals
Name Type Default Description
OPEN BOOLEAN 0 Open indication
CLOSE BOOLEAN 0 Close indication
VALID BOOLEAN 0 Valid indication
PID-4139-OUTPUTSIGNALS v11
Table 187: DPGAPC Output signals
Name Type Description
POSITION INTEGER Double point indication
9.7.5 Settings
ABBD8E283863 v3
The function does not have any parameters available in the local HMI or PCM600.
9.7.6 Operation principle
SEMOD55861-5 v7
When receiving the input signals, DPGAPC sends the signals over IEC 61850-8-1
to the systems, equipment or functions that requests and thus subscribes on these
signals. To be able to get the signals into other systems, equipment or functions,
one must use other tools, described in the Engineering manual, and define which
function block in which systems, equipment or functions should receive this
information.
More specifically, DPGAPC function reports a combined double point position
indication output POSITION, by evaluating the value and the timestamp attributes
of the inputs OPEN and CLOSE, together with the logical input signal VALID.
When the input signal VALID is active, the values of the OPEN and CLOSE inputs
determine the two-bit integer value of the output POSITION. The timestamp of the
output POSITION will have the latest updated timestamp of the inputs OPEN and
CLOSE.
When the input signal VALID is inactive, DPGAPC function forces the position to
intermediated state.
When the value of the input signal VALID changes, the timestamp of the output
POSITION will be updated as the time when DPGAPC function detects the
change.
Refer to Table 188 for the description of the input-output relationship in terms of
the value and the quality attributes.
Section 9
1MRK 505 384-UEN A
Control
316 Breaker protection REQ650 2.2 IEC
Technical manual