background image

 

2036 Fillmore Street 

Davenport, Ia. 52804 

563-324-1046 

www.racedigitaldelay.com

 

 

 

  

 

 

 

 

1014-SCR 

 

WARRANTY AND DISCLAIMER 

 

 

 
DIGITAL DELAY INC. WARRANTS THE PRODUCTS IT 

MANUFACTURES AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP 
FOR A PERIOD LIMITED TO 1 YEAR FROM THE DATE OF SHIPMENT, 
PROVIDED THE PRODUCTS HAVE BEEN STORED, HANDLED, INSTALLED, 
AND USED UNDER PROPER CONDITIONS.  

The company’s liability under this limited warranty shall extend only to the 

repair or replacement of a defective product, at the company’s option. DIGITAL DELAY 
INC. disclaims all liability for any affirmation, promise, or representation with respect to 
the products. 

The customer agrees to hold DIGITAL DELAY INCORPORATED harmless 

from, defend, and indemnify DIGITAL DELAY INC. against damages, claims, and 
expenses arising out of subsequent sales of or use of DIGITAL DELAY INC. products, or 
products containing components manufactured by DIGITAL DELAY INC. and based 
upon personal injuries, deaths, property damage, lost profits, and other matters which 
BUYER, its employees, or sub-contractors are or may be to any extent liable, including 
without limitation, penalties imposed by the Consumer Product Safety Act (P.L. 92-573) 
and liability imposed upon any person pursuant to the Magnuson-Moss Warranty Act (P.L. 
93-637), as now in effect or as amended hereafter. 
 

No warranties expressed or implied, are created with respect to the company’s 

products except those expressly contained herein.  The customer acknowledges the 
disclaimers and limitations contained and relies on no other warranties or affirmations. 

Summary of Contents for 1014-SCR












Reviews: