Subaru 2011 Tribeca, Owner'S Manual

Page: 415 / 580

Black plate (262,1)
北 米
Model "A3160BE-C" EDITED: 2010/ 11/ 19
7-14
Starting and operating
is started.
If the select lever does not move from the
“
P
”
position with the brake pedal de-
pressed, the select lever button pushed
in, and the ignition switch in the ON
position, refer to
“
Shift lock function
” F
7-
14.
!
R (Reverse)
This position is for backing the vehicle.
To shift from the
“
N
”
to
“
R
”
position, stop
the vehicle completely then move the
lever to the
“
R
”
position while pushing
the select lever button.
!
N (Neutral)
This position is for restarting a stalled
engine.
In this position the wheels and transmis-
sion are not locked. In this position, the
transmission is neutral; the vehicle will roll
freely, even on the slightest incline unless
the parking brake or foot brake is applied.
Avoid coasting with the transmission
neutral.
During coasting, there is no engine brak-
ing effect.
NOTE
When the ignition switch has been
turned to the
“
LOCK
”
position, move-
ment of the select lever from the
“
N
”
position to the
“
R
”
position is possible
for a limited time period by depressing
the brake pedal and then becomes
impossible. If the select lever becomes
impossible to be moved after a limited
time period, turn the ignition switch to
the
“
ON
”
position. You will then be able
to move the select lever to the
“
P
”
position.
WARNING
Do not drive the vehicle with the
select lever in the
“
N
”
(Neutral)
position. Engine braking has no
effect in this condition and the risk
of an accident is consequently in-
creased.
!
D (Drive)
This position is for normal driving.
The transmission automatically shifts into
a suitable gear from 1st to 5th according to
the vehicle speed and the acceleration
you require.
When more acceleration is required in this
position, depress the accelerator pedal
fully to the floor and hold that position. The
transmission will automatically downshift
to 4th, 3rd, 2nd or 1st gear. When you
release the pedal, the transmission will
return to the original gear position.
To use the SPORT mode, move the lever
from this position into the manual gate.
To use the manual mode, move the lever
from this position into the manual gate
then move it toward the
“
+
”
and
“ − ”
ends.
!
While climbing a grade
When driving up a hill, undesired upshift to
4th or 5th gear is prevented from taking
place when the accelerator is released.
This minimizes the chance of subsequent
downshifting to a lower gear when accel-
erating again. This prevents repeated
upshifting and downshifting resulting in a
smoother operation of the vehicle.
NOTE
The transmission may downshift to 2nd
or 1st gear, depending on the way the
accelerator pedal is depressed to ac-
celerate the vehicle again.
&
Shift lock function
The shift lock function helps prevent the
improper operation of the select lever.
.
The select lever cannot be operated
unless the ignition switch is turned to the
“
ON
”
position and the brake pedal is
depressed.
.
The select lever cannot be moved from