Subaru 2002 Forester Owner'S Manual Download Page 154

Page: 154 / 383

FORESTER (NA) A8050BE–A (ENG.)

Climate control

4-15

– CONTINUED –

HS4006BB

5. Fill in the maintenance label with the replacement date and mile-
age.
6. Install it on the left hand side of the instrument panel as shown.

The filter must be replaced every 7,500 mile (12,000 km) or 1

year.

The filter may need to be replaced more frequently in dusty

areas.

7. Install the caution label on the left hand side of the instrument pan-
el next to the maintenance label as shown above.

Summary of Contents for 2002 Forester
































































































































































































































































































































































































Search results

Summary of Contents for 2002 Forester

Reviews:

Related manuals for 2002 Forester

Brands by name

Popular brands

Subaru 2002 Forester, Owner'S Manual

Search results

Summary of Contents for 2002 Forester

Reviews:

Related manuals for 2002 Forester

Brands by name

Popular brands