Subaru 2002 Forester, Owner'S Manual

Page: 187 / 383

FORESTER (NA) A8050BE–A (ENG.)
5
Audio
5-33
– CONTINUED –
n
Blank search
Press “TPS” button
R
during playback to return to the beginning of
the current selection or to skip to the beginning of the next selection.
To use this function, press the “TPS” button to turn on the “TPS” indi-
cator. If the fast-forward button “FF”
Y
is then pressed, the player ad-
vances the tape to the beginning of the next selection and starts play-
ing it. If the rewind button “REW”
I
is pressed instead, the player
rewinds the tape to the beginning of the current selection and starts
replaying it. The “TPS” function may not operate properly under the
following conditions:
D
When the recording level is low.
D
When there are long pauses in the middle of a selection.
D
When the tape contains verbal material such as conversations.
D
When the blanks between selections are shorter than five seconds.
D
When there are no blanks between selections (live concerts, etc.).
B
Repeat button (RPT)
Push the “RPT” button
W
to repeat the piece of music being listened
to. To use this function, push the “RPT” button while the piece you
want to hear again is being played. “RPT” will be indicated on the dis-
play. When the selection ends, the cassette player automatically re-
winds to the beginning of the piece and the selection begins again.
To cancel the repeat function, push the “RPT” button again. Until the
repeat function is cancelled, the same piece of music will be repeated
indefinitely. The “RPT” function may not operate properly under the
following conditions:
D
When the recording level is low.
D
When there are long pauses in the middle of a selection.
D
When the tape contains verbal material such as conversations.
D
When the blanks between selections are shorter than five seconds.
D
When there are no blanks between selections (live concerts, etc).
B
Dolby B NR button ( )
Press “ ” button
T
when playing tapes recorded using the Dolby
NR system*. The “ ” indicator will light up and high-frequency
noise on the tape will be reduced for clearer sound reproduction.