Page 41
5-13
#7040743 - Revision A - September, 2016
Component Removal
Built-In Wine Storage (BW) Series
Built-In Wine Storage (BW) Series
Figure 5-29. Control Panel Assembly
Control Panel Assembly
Top Control Panel
Lower Light Bracket
Light Strip
Figure 5-30. Lower Light Strip
Control Panel Assembly and Lower Light Bracket
Removal
The control panel assembly and the lower light bracket
are attached to each other and must be removed
together.
To remove the control panel assembly and the lower
light bracket, first remove at least the top three wine
racks from the unit, then (See Figure 5-29):
1.
Extract the screws from the access panel, and
remove the access panel.
2.
Disconnect the membrane switch ribbon cable, the
LED ribbon cable, and the lower light strip wires
from the control board
3.
Extract the screws from the control panel assembly
and the lower light bracket from the bottom of the
control panel assembly.
4.
Remove the control panel assembly and lower light
assembly by rotating it down while pulling it toward
the front.
3.
Separate the lower light assembly from the control
panel assembly by sliding them apart (See Figure
5-30).
Lower Light Strip Removal
To remove the lower light strip, first remove the control
panel assembly and lower light bracket, then (See
Figure 5-30):
1.
Slide light strip out the end of the lower light bracket
channel.
Front Control Panel