6
Assembly (continued)
3
Combining the upper moldings and side panels
□
Glue one wood dowel (AA) into the inner hole of one upper side panel (G) and attach it to one upper front molding (F) by
engaging two cam locks (BB) as shown.
□
Repeat the same procedure to combine the other upper front molding (F) and the remaining upper side panel (G)
together.
NOTE:
Refer to the dowel and cam lock assembling guide drawings in this step for further clarification on how to properly glue in
the wooden dowels and install cam locks. Apply this method whenever instructed to install wood dowels and cam locks
.
4
Combining the middle stiles and lower partition panels
□
Glue two wood dowels (AA) into the inner hole of the left lower partition panel (K) and attach it to the left middle stile (Q)
by engaging three cam locks (BB) as shown.
□
Repeat the same procedure to combine the right middle stile (R) and the right lower partition panel (L) together.
AA
BB
F
G
L
AA
BB
AA
AA
K
Q
BB
AA
R
GLU
E
X
X
FINAL
1
2
4
3
Summary of Contents for 308824415
Page 19: ......