Stulz SEH0053H40E2, Operating Instructions Manual

Page: 20 / 21

© STULZ GmbH, Hamburg 5
6 Electrical connections
The electrical connections must be performed by an expert and qualified personnel, who are capable of
completing the work correctly and in compliance with the standards in force in the place of installation.
6.1 Configuration for the electrical connection
Power supply must be supplied exclusively through the electrical power supply cable which is issued with
the unit. The internal wiring connection of the ventilated steam distributor is shown in Fig. 6.1 .
7 Start-up
The first time the appliance is started and when maintenance is performed, the operation of the following
devices must be understood:
-
Baffle:
The baffle is located slightly inside and upstream
of the outlet: it is used to change the steam flow direction
(see Fig. 7.1). The angle should be established
when starting the appliance for the first time and should be
only adjusted in case of special needs. The angle should
only be adjusted when the appliance is cold and
not when steam is being released, due to the risk of burns!
-
Air filter (if present):
The cleanliness of the air filter
is essential for ensuring a constant air flow to the
distributor. Neglecting the maintenance of the filter
(cleaning and/or replacement) will seriously affect the
operation of the steam distributor. The user of the
unit is responsible for maintenance, which has to be
performed at least once a year and in any case, according to
the amount of dust in the air.
Humidifier
Ventilated steam
distributor
Fan
Fig. 6.1
Symbol Description
C Klixon
F Fuse
Luftfilter (falls vorhanden)
Deflektor
Abb. 7.1
EN