© STULZ GmbH, Hamburg
2
4 Dismantling the guard
When installing the ventilated steam distributor or performing maintenance, remove the guard from the
appliance as shown in the instructions below (see Fig. 4.1):
1. Disconnect the ventilated steam distributor from the power supply.
2. Unscrew the 2 fastening screws on the upper surface of the guard.
3. Remove the guard vertically, rotating it slightly forwards to release it from the outlet.
To place the guard back in position, perform the same operations in reverse.
Fastening screws
Lift and rotate when
dismantling
Fig 4.1
EN
Summary of Contents for SEH0053H40E2
Page 2: ...STULZ GmbH Hamburg 2...
Page 12: ...STULZ GmbH Hamburg 7...
