manualshive.com logo in svg

Stulz Free-Air-3-IN, Operating Instructions Manual, Page: 6 / 31

Share
Download
Stulz Free-Air-3-IN Operating Instructions Manual Download Page 6

6

Free-AIr-3-IN

EN/02.2018    © STULZ SpA – all rights reserved

IMPOrTANT

These operating instructions are to be read carefully and complied with before installing and 

operating the unit.

Keep this manual for the whole life period of the unit, inside the shelter or together with any other 

literature concerning the equipment which utilizes the product, provided it is a dry and clean 

place.

This manual reflects the state of the art existing at the time the product is marketed and shall not 

be deemed to be inadequate for the sole reason that it has not been updated as a result of any 

new experience.

STULZ reserves the right to update the product and relevant manual without being required to 

update previous products and manuals other than in exceptional circumstances.

To require or receive any updates of the instructions manual or amendments thereto, which shall 

be deemed to be an integral part of the manual, please contact your local STULZ partner.

It is absolutely essential to comply with the measures listed in chapter "Safety directions".

Summary of Contents for Free-Air-3-IN
































Reviews:

No comments