© STULZ Tecnivel – all rights reserved
EN/02.2021 Technical data subject to modifi cations
7
Transport of unit with hoisting beams (example)
Lifting device
Hoisting beams
If you use eyebolts to transport the unit (modules or complete unit), make sure lifting
gear is attached to all eyebolts of the baseframe.
2.3
Storage
If you put the unit into intermediate storage before the installation, the following measures have to be
carried out to protect the unit from damage and corrosion:
• Make sure that the water connections are provided with protective hoods.
• The stotage point must be dry and not exposed to direct sunlight. Recommended storage condi-
tions are as following:
• Temperature [°C]: -10 - +50
• Humidity [% rel. h.]: 5 - 95, without condensation.
• The unit should be stored packaged to avoid the risk of corrosion especially of the heat exchanger
fi ns.
