26
© STULZ Tecnivel – all rights reserved
EN/02.2021 Technical data subject to modifi cations
Air Handlers Units
ClimaPac Series
7. Dismantling and disposal
The air handling unit can only be dismantled by qualifi ed specialists.
• Switch off the ClimaPac Compact unit at the controller and the master switch.
• Switch off power conducting cables to the unit and secure them against being switched on again.
• Disconnect the ClimaPac Compact unit from the de-energized network.
If glycol or similar additives had been used, this liquid also has to be collected and
disposed in an appropriate manner and may under no circumstances be introduced
in the local waste water system.
CAUTION
• Disconnect the unit from the external water circuit by closing the shut-off valves and drain the water
circuit of the unit.
• Move the unit, as described in the chapter “transport”, with a lifting device of suffi cient load-carrying
capacity.
• Dispose of the air handling unit in accordance with the disposal and safety regulations applicable on
site. We recommend a recycling company for this.
The unit basically contains the following raw materials:
• Aluminium (profi les, heat exchanger coils, plate heat exchanger).
• Stainless steel (condensing tray).
• Galvanized steel (frames, panels, roof).
• Zinc aluminium (panels).
• Copper (pipelines, wiring).
